Mould Making

		Code	Ex VAT	Inc VAT
Latex Liquid Rubber - A pre-vulcanised emulsion which will air dry on the surface of a master pattern to for a highly flexible thin rubber skin. This rubber skin can then be inverted to form a mould. Latex rubber can be used for the production of moulds for such diverse items as garden ornaments to theatrical masks. Latex is easy to use, strong and will give good definition and accuracy of reproduction.
500ml		1011208	Ł5.19	Ł6.10
1 litre		1011215	Ł7.99	Ł9.39
5 litres		1011224	Ł28.50	Ł33.49
20 litres		1011239	Ł89.90	Ł105.63

		Code	Ex VAT	Inc VAT
Latex Thickener - By adding up to 1 drop per gram of Latex, it will thicken the Latex to the consistency of emulsion paint. This is particularly useful when painting Latex onto non-porous surfaces, or when wishing to rapidly build up the mould thicnkess.
100g		1011246	Ł1.99	Ł2.33
1kg		1011253	Ł5.99	Ł7.03
5kg		1011260	Ł14.85	Ł17.44
20kg		1011277	Ł37.66	Ł44.25

		Code	Ex VAT	Inc VAT
Latex Colourants - Latex can be coloured using Trylon Latex Colourants in a range of intermixable colours with an addition rate of approximately 5%. The colours will darken considerably on drying and use of excessive amounts may affect the cure of the Latex. Colours available: Red, Yellow, Green, Blue, Brown, Black or White.
150g		1011307	Ł1.75	Ł2.05
450g		1011314	Ł3.99	Ł4.68

		Code	Ex VAT	Inc VAT
Stretchi Paints - Water soluble, non-toxic paint suitable for the painting of cured Latex mouldings or fabrics. Intermixable colours that will not flake or crack. Colours: Red, Yellow, Green, Blue, Bronze, Gold, Black or White.
30ml		1011323	Ł2.99	Ł3.51
140ml		1011338	Ł6.50	Ł7.63

		Code	Ex VAT	Inc VAT
TRYLON Silicone Rubber - An excellent general purpose silicone rubber used for mould making where minute surface detail needs to be reproduced and deep undercuts are present. Silicone rubber has virtually no shrinkage and therefore will accurately reproduce dimensions and is an extremely durable material. NB. All packs include curing agent.
250g		1011345	Ł14.50	Ł17.03
500g		1011352	Ł19.75	Ł23.20
2kg		1011369	Ł63.50	Ł74.61
5kg		1011376	Ł135.00	Ł158.62
20kg		1011383	Ł452.93	Ł532.19

		Code	Ex VAT	Inc VAT
Curing Agent for TRYLON Silicone Rubber - We also sell the curing agent as a 'stand alone' item at the prices as detailed below.
Sufficient for 500g		1011390	Ł3.70	Ł4.34
Sufficient for 2kg		1011406	Ł10.12	Ł11.89
Sufficient for 5kg		1011413	Ł21.70	Ł25.49
Sufficient for 20kg		1011422	Ł59.00	Ł69.32

		Code	Ex VAT	Inc VAT
Thixotropic Agent for TRYLON Silicone Rubber - This product allows the silicone rubber to be thickened and enables it to be 'buttered up' on to vertical surfaces to create a mould.
15g		1011437	Ł3.68	Ł4.32
60g		1011444	Ł8.33	Ł9.78
150g		1011451	Ł15.00	Ł17.62
500g		1011468	Ł36.38	Ł42.74

		Code	Ex VAT	Inc VAT
Heat Resistant Silicone Rubber for Moulds - A translucent silicone rubber with excellent tear strength and capable of withstanding temperatures up to 315°C. This product is ideal for use as a mould for our low melt alloys. The packs contain curing agent, which is also available seperately.
250g		1011154	Ł18.04	Ł21.19
500g		1011161	Ł22.50	Ł26.43
1kg		1011178	Ł41.25	Ł48.46
2kg		1011185	Ł77.12	Ł90.61
5kg		1011192	Ł154.30	Ł181.30

		Code	Ex VAT	Inc VAT
'Siligum' Moulding Paste A two-part silicone resin in paste form, designed to be kneaded together in equal quantities to effect a cure in 5-10 minutes. This is an excellent product, which is easy to use and ideal for moulding small and ornate models, when it will accurately reproduce detail.
100g		1015299	Ł8.66	Ł10.17
300g		1011475	Ł17.86	Ł20.98

Grade		Code	Ex VAT	Inc VAT
Remeltable PVC Compound - This material is used in similar situations to Silicone Rubber, but provides a lower cost, but less durable option. Remeltable PVC can be poured over a master to form a flexible mould. Good tensile strength and flexibility will allow castings with deep undercuts to be removed from a one piece mould, without damage. The material does not require release agent and when the mould is worn, the product can be remelted (at 130-135°C) and used again - a fully recyclable product! We offer the product in two grades, Flexible (Neutral) and Semi Flexible (Blue).
1kg	Flexible	1011482	Ł8.16	Ł9.58
5kg	Flexible	1011499	Ł33.12	Ł38.91
25kg	Flexible	1011505	Ł122.00	Ł143.35
1kg	Semi Flexible	1011512	Ł8.16	Ł9.58
5kg	Semi Flexible	1011521	Ł33.12	Ł38.91
25kg	Semi Flexible	1011536	Ł122.00	Ł143.35

Model	Capacity	Code	Ex VAT	Inc VAT
SEBA Melting Pots for Bluewax or Gelflex thermostatically controlled, temperature range 50°C - 200°C, other ranges and larger units available.
DPS07	0.7 litres	1011567	Ł210.00	Ł246.75
DPS25	2.5 litres	1011574	Ł297.00	Ł348.97
DPS6	6 litres	1011581	Ł399.00	Ł468.82

	Code	Ex VAT	Inc VAT
Polymorph biodegradable mouldable plastic granules that when submerged in hot water at 62°C fuse together and can be formed and shaped by hand as required. Sets hard like nylon. Can be reused.
100gm	1011537	Ł1.99	Ł2.33
250gm	1011538	Ł4.99	Ł5.86
500gm	1011539	Ł8.99	Ł10.56
1kg	1011540	Ł17.97	Ł21.11

	Code	Ex VAT	Inc VAT
Alginate Impression Compound - A rapidly setting material that is supplied in powder form, to be mixed with water. Due to its rapid setting ability and non-toxic nature, it is commonly used in contact with skin to mould body parts e.g. hands and feet. Since the moulding compound is water based, it is best to use plaster as the moulding material to produce the cast. Moulds made with Alginate will rapidly deteriorate and are only suitable for producing one or two casts.
500g	1011543	Ł6.66	Ł7.82
4 x 500g	1011550	Ł22.80	Ł26.79

	Code	Ex VAT	Inc VAT
A Charming Little Foot Kit A kit ideal for use by children for the casting of hands and feet. Contains alginate, a seaweed based product to make the mould and resin plaster for the cast. Makes highly accurate replicas of hands, feet and faces.
Charming Little Foot Kit	1011598	Ł11.39	Ł13.38